[Dx4win] PSK31

[Joe Giacobello]

Bill, I've only operated PSK31 a few times, but a simple way of checking 
your system's receive function is to just connect a cable DIRECTLY from 
the fixed audio output jack on the back of the MP to one of your sound 
card audio inputs, e.g. Mike.  You should be able to copy PSK31 with the 
DX4WIN without a problem.

However, make sure that your sound card controls are properly setup.  I 
am using W98 here and you have to go into the audio menu either through 
the control panel (Multimedia) or the volume (speaker) control icon at 
the bottom of your screen.  If I remember correctly, you have to adjust 
the parameters under "Recording" to optimize PSK receive.  Also, make 
sure that the audio input that you're using on the sound card is 
activated, i.e not muted.  I'll bet the problem lies in these controls.

73 es GL de Joe

Bill Morris wrote:

>I am unable to receive PSK 31. The radio is a Yaesu-FT-1000MP connected to a
>DELL  computer. DX4WIN is working fine at version 6.2
>Is there something that i am missing ? I  should be able to receive. But I
>can not.
>Could not find relevant info in the Archives. Any help would be appreciated.
>
>73 from KR2S  Bill Morris
>
>_______________________________________________
>Dx4win mailing list
>Dx4win@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>  
>