[Dx4win] PSK31 support for LPT keying

Sun, 26 Oct 2003 18:41:33 +0100

Hi Larry

All you have to do is set the PTT delay to 500ms
and you can use both functions with CW control enabled
in the PSK window

73 Martin

ON6MX

----- Original Message -----
From: "Roger Borowski" <[email protected]>
To: "Larry Gauthier (K8UT)" <[email protected]>; <[email protected]>
Sent: Sunday, October 26, 2003 3:43 PM
Subject: Re: [Dx4win] PSK31 support for LPT keying


> Larry, In Ver 6.0x, you have to geo into "Preferences" and "Control" and
> switch the configuration from CW to PSK31 PTT and back and forth depending
> on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying
port
> was selectable in the PSK31 window. Now its a real pain to switch between
> these modes as it requires you to go into Preferences and control each
time
> you change modes. I've alerted Paul numerous times about this and
hopefully
> it will be addressed in the next maintenance release.
> 73, -=Rog-K9RB=-
>
> ----- Original Message -----
> From: "Larry Gauthier (K8UT)" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, October 26, 2003 6:25 AM
> Subject: [Dx4win] PSK31 support for LPT keying
>
>
> > Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This
> > works fine for CW, but when operating in PSK31 mode, the LPT keyed line
> does
> > not seem to operate. I have gone into the PSK Tx preference window and
> > checked the "use CW control" - but the LPT CW line does not work from
PSK.
> > (the frustrating fact is that PSK keying _does_ work under exactly the
> same
> > settings from the COM port - but my com ports are dedicated to other
> > functions).
> >
> > Am I doing something wrong here ?
> >
> > -larry
> > K8UT
> >
> > _______________________________________________
> > Dx4win mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/dx4win
> >
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>