[Dx4win] FT-1000 Field as 2nd radio

Sat, 18 Oct 2003 06:26:17 -0500

He has the Field - should be same as FT-1000MP etc - shouldn't need a null
cable.

----- Original Message ----- 
From: "ON4MA Marc" <[email protected]>
To: "Bob Applegate" <[email protected]>; <[email protected]>
Sent: Saturday, October 18, 2003 3:44 AM
Subject: Re: [Dx4win] FT-1000 Field as 2nd radio

> What cable you are using ?
> You need a nullmodem cable for the ft1000
> 73
> marc on4ma
> ----- Original Message -----
> From: "Bob Applegate" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, October 16, 2003 4:03 PM
> Subject: [Dx4win] FT-1000 Field as 2nd radio
>
>
> > Last night I connect a 1000 Field as a second radio with DX4WIN 6.02.
The
> > first
> > radio (TS-850) works fine, but DX4WIN doesn't seem to find the 1000.
> >
> > I did switch to the 2nd radio.  The CAT portion of the 1000 display
turns
> on
> > and off;
> > is it supposed to do that, or should it remain on?  Clearly, the 1000 is
> > seeing data from
> > the computer.  After a while, DX4WIN says the radio timed out.
> >
> > I also replaced every cable between the computer and radio, and tried
two
> > different
> > serial ports; exactly the same results.  The ports were both from a PCI
> > 4-port
> > serial card, not standard COM1 nor COM2.  Other ports on the same card
do
> > work
> > with other software packages, so I'm assuming the serial ports are okay.
> >
> > Am I missing some setup option in the 1000 or DX4WIN?
> >
> > 73
> >
> > Bob - K2UT
> >
> > _______________________________________________
> > Dx4win mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/dx4win
> >
> >
> >
>
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win