[Dx4win] FT-1000 Field as 2nd radio

[ON4MA Marc]

What cable you are using ?
You need a nullmodem cable for the ft1000
73
marc on4ma
----- Original Message -----
From: "Bob Applegate" <bob@applegate.org>
To: <dx4win@mailman.qth.net>
Sent: Thursday, October 16, 2003 4:03 PM
Subject: [Dx4win] FT-1000 Field as 2nd radio


> Last night I connect a 1000 Field as a second radio with DX4WIN 6.02.  The
> first
> radio (TS-850) works fine, but DX4WIN doesn't seem to find the 1000.
>
> I did switch to the 2nd radio.  The CAT portion of the 1000 display turns
on
> and off;
> is it supposed to do that, or should it remain on?  Clearly, the 1000 is
> seeing data from
> the computer.  After a while, DX4WIN says the radio timed out.
>
> I also replaced every cable between the computer and radio, and tried two
> different
> serial ports; exactly the same results.  The ports were both from a PCI
> 4-port
> serial card, not standard COM1 nor COM2.  Other ports on the same card do
> work
> with other software packages, so I'm assuming the serial ports are okay.
>
> Am I missing some setup option in the 1000 or DX4WIN?
>
> 73
>
> Bob - K2UT
>
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>