[Dx4win] 6.1 and PSK

Thu, 30 Jan 2003 20:58:23 -0500

Yup.. That's it... My PSK31 is working fine with PTT

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of ON4AOI
Sent: January 30, 2003 5:37 PM
To: WC7N
Cc: [email protected]
Subject: Re: [Dx4win] 6.1 and PSK

>5.  In summary my problem is that I need to tell DX4WIN that I am using

>COM  4 to key the RigBlaster so the signal is passed to the mike input 
>of the  transceiver.

Hi Rod,

In the PSK31 Settings|TX section is the possibility to mark "USE CW
CONTROL" this means it follows your preferences|SETTINGS for CW/PTT if
you specify CW/PTT via LPT(x) then it will be keyed via this LPT(x) port
if you specify CW/PTT via com(x) then it will be keyed that serial port

73 Guy ON4AOI

BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at
http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at
http://www.on4aoi.be/dxt.htm

MY SALESPAGE with radioamateur & computer parts
http://www.on4aoi.be/sale.htm

----- Original Message -----
From: "WC7N" <[email protected]>
To: "DX4WIN Group" <[email protected]>
Sent: Thursday, January 30, 2003 9:42 PM
Subject: [Dx4win] 6.1 and PSK

> 1.  I use a Rigblaster in line with my computer to key PSK-31.  This 
> has always been done through COM 4.
>
> 2.  In the old DX4WIN if you clicked on Settings|TX there was a spot 
> to specify the COM port for PSK-31 transmitting.
>
> 3.  While the TX flag is in the new version it does not give me the
ability
> to specify what COM port it is to use. Therefore, I am unable to key 
> the transmitter in the PSK mode.  The receive is fine and a double 
> check with the old DX4WIN showed no problems with receive. or transmit

> .
>
> 4.  Does anybody have the answer for my problem.
>
> 5.  In summary my problem is that I need to tell DX4WIN that I am 
> using
COM
> 4 to key the RigBlaster so the signal is passed to the mike input of 
> the transceiver.
>
> Help please.
>
> Rod WC7N
> [email protected]
>
> _______________________________________________
> Dx4win mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
>
>

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win