[Dx4win] 6.1 and PSK

Thu, 30 Jan 2003 22:36:50 -0000

>5.  In summary my problem is that I need to tell DX4WIN that I am using COM
> 4 to key the RigBlaster so the signal is passed to the mike input of the
> transceiver.

Hi Rod,

In the PSK31 Settings|TX section is the possibility to mark "USE CW CONTROL"
this means it follows your preferences|SETTINGS for CW/PTT
if you specify CW/PTT via LPT(x) then it will be keyed via this LPT(x) port
if you specify CW/PTT via com(x) then it will be keyed that serial port

73 Guy ON4AOI

BAND DECODER and related stuff at
http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at
http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at
http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at
http://www.on4aoi.be/dxt.htm

MY SALESPAGE with radioamateur & computer parts
http://www.on4aoi.be/sale.htm

----- Original Message -----
From: "WC7N" <[email protected]>
To: "DX4WIN Group" <[email protected]>
Sent: Thursday, January 30, 2003 9:42 PM
Subject: [Dx4win] 6.1 and PSK

> 1.  I use a Rigblaster in line with my computer to key PSK-31.  This has
> always been done through COM 4.
>
> 2.  In the old DX4WIN if you clicked on Settings|TX there was a spot to
> specify the COM port for PSK-31 transmitting.
>
> 3.  While the TX flag is in the new version it does not give me the
ability
> to specify what COM port it is to use. Therefore, I am unable to key the
> transmitter in the PSK mode.  The receive is fine and a double check with
> the old DX4WIN showed no problems with receive. or transmit .
>
> 4.  Does anybody have the answer for my problem.
>
> 5.  In summary my problem is that I need to tell DX4WIN that I am using
COM
> 4 to key the RigBlaster so the signal is passed to the mike input of the
> transceiver.
>
> Help please.
>
> Rod WC7N
> [email protected]
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>