[Dx4win] MMTTY xmit & rcv keys

Wed, 12 Jun 2002 17:54:59 -0500

All caps on purpose!

I WANT A RTTY PROGRAM THAT HAS A TRUE TYPE AHEAD BUFFER.  You know, like
punching tape.  A buffer that will hold the data until it is told to send
it.  The only one I have is the old TRTY   None of the new stuff has such a
thing.  I know   they all say their progrms have a type ahead buffer but it
is NOT a holding buffer andf I do not type that fast.  (Would like to have
back the money wasted)

73 y'all

RoY  N4AN

----- Original Message -----
From: "Floyd Sense" <[email protected]>
To: <[email protected]>; "Dave" <[email protected]>
Sent: Wednesday, June 12, 2002 1:35 PM
Subject: Re: [Dx4win] MMTTY xmit & rcv keys

> Yes, you are correct and that's certainly good information.  However, I'm
> one of those old-time RTTY guys who sometimes actually carries on a
two-way
> conversation in RTTY mode!  That makes the canned macros not always very
> useful.  I find that I have 7 of the 8 function keys already populated
with
> canned messages.  If I had a couple of spares, then I could put just a "\"
> in one string (switch to receive) and "%T" in the other (switch to
> transmit).  The alternate function keys selected by pressing CTRL, of
> course, defeats my goal of a single keystroke to switch.  Now if we just
had
> 12 function keys we could set up instead of the 8, that might be a
> reasonable alternative.
>
> K8AC
> ----- Original Message -----
> From: "Dave" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, June 12, 2002 12:33 PM
> Subject: Re: [Dx4win] MMTTY xmit & rcv keys
>
>
> > Floyd et all
> >
> > For most of the standard  messages the transmit and receive commands can
> be
> > embedded in the DX4WIN pre-programmed RTTY message function keys using
"/"
> > and "%T" at the end of the line.The most useful info I have seen on this
> > was sent to me a few weeks ago by Larry K8UT and John WA9ALS. The info
is
> > on John's WEB page at....
> >
> > http://www.qsl.net/wa9als/dx4win-mmtty-macros.rtf .
> >
> <snip>
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>