[Dx4win] MMTTY xmit & rcv keys

[Floyd Sense]

Yes, you are correct and that's certainly good information.  However, I'm
one of those old-time RTTY guys who sometimes actually carries on a two-way
conversation in RTTY mode!  That makes the canned macros not always very
useful.  I find that I have 7 of the 8 function keys already populated with
canned messages.  If I had a couple of spares, then I could put just a "\"
in one string (switch to receive) and "%T" in the other (switch to
transmit).  The alternate function keys selected by pressing CTRL, of
course, defeats my goal of a single keystroke to switch.  Now if we just had
12 function keys we could set up instead of the 8, that might be a
reasonable alternative.

K8AC
----- Original Message -----
From: "Dave" <nr1dx@arrl.net>
To: <dx4win@mailman.qth.net>
Sent: Wednesday, June 12, 2002 12:33 PM
Subject: Re: [Dx4win] MMTTY xmit & rcv keys


> Floyd et all
>
> For most of the standard  messages the transmit and receive commands can
be
> embedded in the DX4WIN pre-programmed RTTY message function keys using "/"
> and "%T" at the end of the line.The most useful info I have seen on this
> was sent to me a few weeks ago by Larry K8UT and John WA9ALS. The info is
> on John's WEB page at....
>
> http://www.qsl.net/wa9als/dx4win-mmtty-macros.rtf .
>
<snip>