[DSP-10] re: PC to DSPX communications problem

[Giuliano]

Dear Hermann,

I have modified the .CFG file but don't work yet.

In the DSPx I am using the original . BLM file.

any other idea?
Thanks
Giuliano


> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 3 Oct 2007 12:37:18 +0200
> From: "Giuliano" <giulianori at virgilio.it>
> Subject: [DSP-10] PC to DSPX communications problem
> To: <dsp-10 at mailman.qth.net>
> Message-ID: <001d01c805a9$5f248560$0201a8c0 at compnew>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hi all,
> I am working to DSP10 but I have a communications problem with DSPX.
> I am using a windows 98 PC with pure DOS  ( I start PC directly with DOS )
> but, normally, UHFA  ( V 3.8 ) respond with a  Time out error. Rarely PC
> start and DSP10  work very well.
> So I ask  if someone have had and solved this problem.
> I don't use any DSP10 Hardware so the P101 connector is all open. I have
> also closed to gnd pin 7 of J101 ( HW ready signal ) but isn't yet 
> working.
>
> Thanks for any help
> 73
> Giuliano I0CG
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 3 Oct 2007 16:34:43 +0200
> From: "f5vkq" <f5vkq at wanadoo.fr>
> Subject: Re: [DSP-10] PC to DSPX communications problem
> To: "Discussion of DSP-10 2-meter transceiver"
> <dsp-10 at mailman.qth.net>
> Message-ID: <000c01c805ca$8ec9c660$cab2f8c1 at netsys1>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Giuliano...de Hermann F5VKQ.
>
>
>
> Did you ever change the CFG File ???
>
> You have to change at least 2 parameters.
>
>
>
> hardware = 0  ( because no Hardware is connected
>
> hardware_ptt = 0 (because ptt is not connected yet)
>
>
>
> Pse try this and see if you come up...
>
>
>
> Any questions are welcome...............don't hesitate to ask.
>
>
>
> 73  de Hermann
>