[DSP-10] re: DSP-10 to PC protocol

[Giuliano]

Dear Bob,
many thanks for informations.
I go to test the protocol with my PIC controller.
My intention isn't to interface all commands but only the strictly necessary 
to work the trasceiver without PC. For  all others commands I continue to 
use the external PC.
It Is only two day that I am playng with with DSP-10 loaded on the DSPx 
flash area(As PC  I am using an old HP OMNIBOOK 900 that is working very 
well ).
 Fantastic work Bob, thanks very mach!
73
Giuliano I0CG
----- Original Message ----- 
From: <dsp-10-request at mailman.qth.net>
To: <dsp-10 at mailman.qth.net>
Sent: Tuesday, April 17, 2007 10:01 AM
Subject: DSP-10 Digest, Vol 39, Issue 4


> Send DSP-10 mailing list submissions to
> dsp-10 at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/dsp-10
> or, via email, send a message with subject or body 'help' to
> dsp-10-request at mailman.qth.net
>
> You can reach the person managing the list at
> dsp-10-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of DSP-10 digest..."
>
>
> Today's Topics:
>
>   1. DSP-10 to PC protocol (Giuliano)
>   2. Re: DSP-10 to PC protocol (Bob Larkin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 Apr 2007 17:01:01 +0200
> From: "Giuliano" <giulianori at virgilio.it>
> Subject: [DSP-10] DSP-10 to PC protocol
> To: <dsp-10 at mailman.qth.net>
> Message-ID: <000901c78038$0c7a3d10$0201a8c0 at compnew>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> I am searching the DSP-10 to PC protocol via the RS232.
> My intention is to drive DSP-10 (using DSPx ) via my PIC controller based 
> on
> PIC18F2620 Microchip micro. So I can use DSP-10 without any PC.
> Exist any documnets explain this protocol??
> Thanks for  any help
> Giuliano I0CG
> ITALY
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 17 Apr 2007 07:43:13 +0000
> From: Bob Larkin <boblark at proaxis.com>
> Subject: Re: [DSP-10] DSP-10 to PC protocol
> To: Discussion of DSP-10 2-meter transceiver <dsp-10 at mailman.qth.net>
> Message-ID: <6.0.0.22.2.20070417073553.0342a2d8 at proaxis.com>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> Hello Giuliano,
>
> The commands are listed on a page, linked from the DSP-10 main page. It is
> http://www.proaxis.com/~boblark/pc_dsp2.txt
>
> I believe this list is still correct, except for the microphone gain
> setting, Command 'M'.  There may also be a command not shown, used for
> transmitting tones.  The core transmit and receive commands should all 
> work
> as shown!   Let me know if you have problems.
>
> 73, Bob  W7PUA
>
> At 05:01 PM 4/16/2007 +0200, Giuliano wrote:
>>I am searching the DSP-10 to PC protocol via the RS232.
>>My intention is to drive DSP-10 (using DSPx ) via my PIC controller based
>>on PIC18F2620 Microchip micro. So I can use DSP-10 without any PC.
>>Exist any documnets explain this protocol??
>>Thanks for  any help
>>Giuliano I0CG
>>ITALY
>>
>>
>>
>>_______________________________________________
>>DSP-10 mailing list
>>DSP-10 at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/dsp-10
>>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> DSP-10 mailing list
> DSP-10 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dsp-10
>
>
> End of DSP-10 Digest, Vol 39, Issue 4
> *************************************
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.5.1/764 - Release Date: 17/04/2007 
> 4.43
>
>