[DSP-10] DSP 10 Artwork

[Bob Larkin]

Hi Tom- I will send (directly) a photo of the board in that area w/o parts. 
73, Bob

At 05:34 AM 1/17/2006, you wrote:
>I really just need the area around the 4066 which I installed upside down 
>and in haste tore up the traces trying to remove it.  But what ever you 
>can do would help.
>Thanks Tom
> >
> > From: Bob Larkin <boblark at proaxis.com>
> > Date: 2006/01/17 Tue AM 03:08:29 EST
> > To: Discussion of DSP-10 2-meter transceiver <dsp-10 at mailman.qth.net>
> > Subject: Re: [DSP-10] DSP 10 Artwork
> >
> > Tom, I can send you the Gerber files that made the board. All files can be
> > viewed with a Gerber Viewer (available on the Internet, I believe).  I do
> > not have any standard graphics files (GIF, JPG, etc), that show the board.
> > The Gerber files show the traces, holes, silk screen, solder mask,
> > etc.  Let me know if they would be useful.  73, Bob W7PUA
> >
> > At 10:46 AM 1/16/2006, you wrote:
> > >I need a copy of the art work so I can correct a problem with my board.
> > >Need not be to scale.
> > >Tom
> > >
> > >_______________________________________________
> > >DSP-10 mailing list
> > >DSP-10 at mailman.qth.net
> > >http://mailman.qth.net/mailman/listinfo/dsp-10
> >
> >
> > _______________________________________________
> > DSP-10 mailing list
> > DSP-10 at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/dsp-10
> >
>
>_______________________________________________
>DSP-10 mailing list
>DSP-10 at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10