[DSP-10] DSP-X ---loading UHF3 to Flash

[kd7ts]

Hint: the program runs from RAM, not Flash.  The Flash just provides a 
quick way to load a file so you don't have to use the serial port, but 
you need the serial port conenction anyway to run the DSP-10 application.

Hi Lyle,


Ok, I get it !!

Just program storage.

It makes sense

I have no idea what a intelhex file looks like. But... I'll see if I 
can find out. I do have the Eprom source to look at.

 > For which purpose do you need it in Intel Hex,
 >and for which purposes do you need it in Analog
 >Devices loader format?

I don't know, that's why I asked. The original Eprom code is intel 
hex, so I would think that the 2185 would read in the same manner as 
the 2181 and would also be intel hex. But... if we are just loading 
the RAM through the serial port, then we are using EZFAST or EZLD, and 
intel hex is not needed.

So a batch file might look like:

ezfast  1 UHF3X.EXE G
UHFA 1

------------

Confusing because I read all the docs, not realizing they were for 3 
different applications.

Thanks  de Mike KD7TS