[DSP-10] Re: Comments on loading DSPx with DSP 10
Bob Larkin
boblark at proaxis.com
Tue Dec 13 16:16:40 EST 2005
Hi Bob,
Jimmy may have more comments, but let me jump in with one!
It appears that the successful load to bank 1 of UHF3XH.HEX was using COM
port 2. The later command to XFLASH1 was using COM port 1. The trace files
don't show the port for XF_TERM1, so I can't tell if they failed because of
the COM port.
Thanks for sending the trace file. It hopefully aids with this kind of thing!
73,
Bob W7PUA
At 11:27 AM 12/13/2005, you wrote:
>Hi Jimmy
>I attach the trace file - but I think it has most of my attempts in it.
>Anyway maybe you can decode it.
>I have the DSP 10 code working just fine in the DSPx
>
>73 Bob G3PJT
>
>Jimmy Oldaker W7CQ wrote:
>
>>Bob
>>you wrote:
>>
>>3: If I run the auto load FL1 then it loads FLASHUTL OK ( verified with
>>TerraTerm) but the XFLASH Loader fails with a Timeout error - no
>>communication with FLASHUTL. and then exits to DOS. Maybe this is pont
>>Bob makes on the DSPx site
>>********************************************************
>>Can you send me and cc: to Bob, W7PUA, boblark at proaxis.com a copy of
>>XF_TRACE.TXT that was generated in your directory where you put all your
>>flash programing files. If you have the latest version of the Flash
>>loader for loading this file should be there. Earlier versions don't
>>generate this file. With that Bob and I will look it over it and see if
>>we can figure out what is going on. This is what beta testing is all
>>about. Please let us know!
>>
>>Jimmy W7CQ
>>
>> 73's - W7CQ - CN83jx
>>
>>
>>
>
>
>
>------ XFLASH1 Ver 0.5 New Run ------
>Date ymd: 2005 12 7 Time: 0906 16 sec
>Command line: argc=5, |C:\BC4\XFLASH\XFLASH1.EXE 2 1 uhf3xh.hex 1 |
>Following is a transcript of PC screen:
>
>***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
>J: Jmp: 03 OK meaning JP1 open JP2 open
>S010000: Addr Hi: 01 Addr Lo: 0000 OK
>S011000: Addr Hi: 01 Addr Lo: 1000 OK
>S012000: Addr Hi: 01 Addr Lo: 2000 OK
>S013000: Addr Hi: 01 Addr Lo: 3000 OK
>S014000: Addr Hi: 01 Addr Lo: 4000 OK
>S015000: Addr Hi: 01 Addr Lo: 5000 OK
>S016000: Addr Hi: 01 Addr Lo: 6000 OK
>S017000: Addr Hi: 01 Addr Lo: 7000 OK
>S018000: Addr Hi: 01 Addr Lo: 8000 OK
>S019000: Addr Hi: 01 Addr Lo: 9000 OK
>S01A000: Addr Hi: 01 Addr Lo: A000 OK
>S01B000: Addr Hi: 01 Addr Lo: B000 OK
>S01C000: Addr Hi: 01 Addr Lo: C000 OK
>S01D000: Addr Hi: 01 Addr Lo: D000 OK
>S01E000: Addr Hi: 01 Addr Lo: E000 OK
>S01F000: Addr Hi: 01 Addr Lo: F000 OK
>B1: Flash Bank (0-7): 1 OK
>p: program to Flash OK
>Z: Status: 00 OK
>Z: Status: 00 OK
>Loading hex
>file:
>.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
.....
..
>..................................................................................................................................................................................................................................
>Successful load to DSPx of 39074 bytes from 1222 lines
>
>Exiting XFLASH1
>Time: 0908 06 sec
>
> ------ XF_TERM1 Ver 0.2 ------
>
>***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
>
>Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
>This will time out in 30 seconds.
>TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
>Bank 0 Monitor load apparently NOT successful.
>Exiting XF_TERM1
> ------ XF_TERM1 Ver 0.2 ------
>
>***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
>
>Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
>This will time out in 30 seconds.
>TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
>Bank 0 Monitor load apparently NOT successful.
>Exiting XF_TERM1
> ------ XF_TERM1 Ver 0.2 ------
>
>***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
>Missing parameter in the command line.
>
>Format for the command line must be:
> XF_TERM1 PORT
> where PORT is the COM port (1 to 4)
>ERROR - Invalid command line.
>Exiting XF_TERM1
> ------ XF_TERM1 Ver 0.2 ------
>
>***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
>
>Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
>This will time out in 30 seconds.
>TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
>Bank 0 Monitor load apparently NOT successful.
>Exiting XF_TERM1
> ------ XF_TERM1 Ver 0.2 ------
>
>***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
>
>Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
>This will time out in 30 seconds.
>TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
>Bank 0 Monitor load apparently NOT successful.
>Exiting XF_TERM1
>------ XFLASH1 Ver 0.5 New Run ------
>Date ymd: 2005 12 12 Time: 2117 08 sec
>Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
>Following is a transcript of PC screen:
>
>***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
>TIMEOUT ERROR- I: No communications from FLASHUTL
>Exiting XFLASH1, Flashutl error.
>Time: 2117 12 sec
>
>------ XFLASH1 Ver 0.5 New Run ------
>Date ymd: 2005 12 12 Time: 2117 48 sec
>Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
>Following is a transcript of PC screen:
>
>***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
>TIMEOUT ERROR- I: No communications from FLASHUTL
>Exiting XFLASH1, Flashutl error.
>Time: 2117 52 sec
>
>------ XFLASH1 Ver 0.5 New Run ------
>Date ymd: 2005 12 13 Time: 0936 55 sec
>Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
>Following is a transcript of PC screen:
>
>***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
>TIMEOUT ERROR- I: No communications from FLASHUTL
>Exiting XFLASH1, Flashutl error.
>Time: 0936 58 sec
>
>------ XFLASH1 Ver 0.5 New Run ------
>Date ymd: 2005 12 13 Time: 0945 19 sec
>Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
>Following is a transcript of PC screen:
>
>***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
>TIMEOUT ERROR- I: No communications from FLASHUTL
>Exiting XFLASH1, Flashutl error.
>Time: 0945 22 sec
>_______________________________________________
>DSP-10 mailing list
>DSP-10 at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10
More information about the DSP-10
mailing list