[DSP-10] Re: Comments on loading DSPx with DSP 10
Bob G3PJT
g3pjt at btinternet.com
Tue Dec 13 14:27:06 EST 2005
Hi Jimmy
I attach the trace file - but I think it has most of my attempts in it.
Anyway maybe you can decode it.
I have the DSP 10 code working just fine in the DSPx
73 Bob G3PJT
Jimmy Oldaker W7CQ wrote:
> Bob
> you wrote:
>
> 3: If I run the auto load FL1 then it loads FLASHUTL OK ( verified
> with TerraTerm) but the XFLASH Loader fails with a Timeout error - no
> communication with FLASHUTL. and then exits to DOS. Maybe this is pont
> Bob makes on the DSPx site
> ********************************************************
> Can you send me and cc: to Bob, W7PUA, boblark at proaxis.com a copy
> of XF_TRACE.TXT that was generated in your directory where you put all
> your flash programing files. If you have the latest version of the
> Flash loader for loading this file should be there. Earlier versions
> don't generate this file. With that Bob and I will look it over it and
> see if we can figure out what is going on. This is what beta testing
> is all about. Please let us know!
>
> Jimmy W7CQ
>
> 73's - W7CQ - CN83jx
>
>
>
>
-------------- next part --------------
------ XFLASH1 Ver 0.5 New Run ------
Date ymd: 2005 12 7 Time: 0906 16 sec
Command line: argc=5, |C:\BC4\XFLASH\XFLASH1.EXE 2 1 uhf3xh.hex 1 |
Following is a transcript of PC screen:
***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
J: Jmp: 03 OK meaning JP1 open JP2 open
S010000: Addr Hi: 01 Addr Lo: 0000 OK
S011000: Addr Hi: 01 Addr Lo: 1000 OK
S012000: Addr Hi: 01 Addr Lo: 2000 OK
S013000: Addr Hi: 01 Addr Lo: 3000 OK
S014000: Addr Hi: 01 Addr Lo: 4000 OK
S015000: Addr Hi: 01 Addr Lo: 5000 OK
S016000: Addr Hi: 01 Addr Lo: 6000 OK
S017000: Addr Hi: 01 Addr Lo: 7000 OK
S018000: Addr Hi: 01 Addr Lo: 8000 OK
S019000: Addr Hi: 01 Addr Lo: 9000 OK
S01A000: Addr Hi: 01 Addr Lo: A000 OK
S01B000: Addr Hi: 01 Addr Lo: B000 OK
S01C000: Addr Hi: 01 Addr Lo: C000 OK
S01D000: Addr Hi: 01 Addr Lo: D000 OK
S01E000: Addr Hi: 01 Addr Lo: E000 OK
S01F000: Addr Hi: 01 Addr Lo: F000 OK
B1: Flash Bank (0-7): 1 OK
p: program to Flash OK
Z: Status: 00 OK
Z: Status: 00 OK
Loading hex file: ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Successful load to DSPx of 39074 bytes from 1222 lines
Exiting XFLASH1
Time: 0908 06 sec
------ XF_TERM1 Ver 0.2 ------
***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
This will time out in 30 seconds.
TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
Bank 0 Monitor load apparently NOT successful.
Exiting XF_TERM1
------ XF_TERM1 Ver 0.2 ------
***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
This will time out in 30 seconds.
TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
Bank 0 Monitor load apparently NOT successful.
Exiting XF_TERM1
------ XF_TERM1 Ver 0.2 ------
***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
Missing parameter in the command line.
Format for the command line must be:
XF_TERM1 PORT
where PORT is the COM port (1 to 4)
ERROR - Invalid command line.
Exiting XF_TERM1
------ XF_TERM1 Ver 0.2 ------
***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
This will time out in 30 seconds.
TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
Bank 0 Monitor load apparently NOT successful.
Exiting XF_TERM1
------ XF_TERM1 Ver 0.2 ------
***** XFTERM1 Serial Monitor Checker Ver 0.2 *****
Be sure DSPx JP1 is open; Hit DSPx RESET to run Bank 0 Monitor.
This will time out in 30 seconds.
TIMEOUT ERROR: No communications from DSPx ERROR - Banner not found.
Bank 0 Monitor load apparently NOT successful.
Exiting XF_TERM1
------ XFLASH1 Ver 0.5 New Run ------
Date ymd: 2005 12 12 Time: 2117 08 sec
Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
Following is a transcript of PC screen:
***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
TIMEOUT ERROR- I: No communications from FLASHUTL
Exiting XFLASH1, Flashutl error.
Time: 2117 12 sec
------ XFLASH1 Ver 0.5 New Run ------
Date ymd: 2005 12 12 Time: 2117 48 sec
Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
Following is a transcript of PC screen:
***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
TIMEOUT ERROR- I: No communications from FLASHUTL
Exiting XFLASH1, Flashutl error.
Time: 2117 52 sec
------ XFLASH1 Ver 0.5 New Run ------
Date ymd: 2005 12 13 Time: 0936 55 sec
Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
Following is a transcript of PC screen:
***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
TIMEOUT ERROR- I: No communications from FLASHUTL
Exiting XFLASH1, Flashutl error.
Time: 0936 58 sec
------ XFLASH1 Ver 0.5 New Run ------
Date ymd: 2005 12 13 Time: 0945 19 sec
Command line: argc=5, |C:\WORK\DSPXLO~1\XFLASH1.EXE 1 1 uhf3xh.hex 1 |
Following is a transcript of PC screen:
***** XFLASH1 Loader for DSPx Flash memory. Ver 0.5 *****
TIMEOUT ERROR- I: No communications from FLASHUTL
Exiting XFLASH1, Flashutl error.
Time: 0945 22 sec
More information about the DSP-10
mailing list