[DSP-10] GPS25-LVS Receiver

Tue, 30 Apr 2002 00:25:34 +0000

Hi Steve;
I have the 1PPS running fine once started, but when I remove power from the 
GPS board i have to restart the blasted thing....is this 
natural???  Appears to be a bit of a pain, I first suspected the on board 
backup battery, but heck that is fine.
I did download TAC32 and will, in all likely hood be purchasing this from TARP.
What do you think???

Regards & Thanks, Darrell
BTW! I looked at TACGPS and never found the answer I needed.

At 21:02 4/28/2002 -0700, you wrote:
>Hello Darrell, you are not imagining things, you do have to turn on the
>1PPS.  Look closely at the manual and you should find the command.  Ask on
>the TACGPS list and folks there may have the exact solution for you.  Or try
>TAC32 to do the configuing for you.
>
>- Steve, N7HPR
>   ([email protected])
>
>
>
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On Behalf Of Darrell
> > Sent: Sunday, April 28, 2002 6:05 PM
> > To: [email protected]
> > Subject: [DSP-10] GPS25-LVS Receiver
> >
> >
> > Hi Folks;
> >
> > Is there anybody on here that has some experience with the Garmin
> > GPS25-LVS
> > receivers?? This may not be a problem, but I am not seeing the 1s pulse
> > (1PPS) from the unit at all. My Active Antenna should be seeing all GPS
> > Satellites available.
> >
> > Do I have to activate that 1PPS???  According to the blasted manual I
> > should be seeing it as soon as the receiver has accessed a minimum number
> > of Sat's.
> >
> > Anyone have any suggestions that will help. or clarify this for me???
> >
> > Regards & Thanks, Darrell
> > VE1ALQ, or VE9DW on EME
> >
> >
> > _______________________________________________
> > DSP-10 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/dsp-10
>
>_______________________________________________
>DSP-10 mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dsp-10