[Drake] Drake L4B Plate voltage

[The Pollacks]

Manual says No load 1900/2600 load 1760/2400 CW/SSB

Have the manual on disc if anyone needs it forwarded.

Ron K2RP

-----Original Message-----
From: drake-bounces at mailman.qth.net [mailto:drake-bounces at mailman.qth.net]
On Behalf Of John King
Sent: Sunday, November 27, 2011 2:47 PM
To: Drake at mailman.Qth.net
Subject: [Drake] Drake L4B Plate voltage

My Drake L4B has been sitting unused for about three years. Today,I replaced
the blower wheel on the blower and have it fired up. Since I haven't been
using it, I have become unfamiliar with the meter readings. 

My line voltage here,I suspect is about 240 vac because the the other shack
voltage is 120vac. My question is, what plate voltage should I see on the
L4B volt meter? It appears to be about 2,700 vdc in the SSB position. Does
that sound about what it should be? 

Your experience with the normal plate voltages for the L4B will be
appreciated , John, K5PGW   
______________________________________________________________
Drake mailing list
Home: http://mailman.qth.net/mailman/listinfo/drake
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Drake at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html