[Drake] Drake L-4B connector question

[Jerry Kessler]

Dave,

I believe what you are looking at is the high voltage connector to 
the L4B amp chassis and not part of a fuse holder.  You should see a 
mating connector on the back of the L4B.  In other words, the cable 
from the L4PS makes two connections on the back of the amp.

Jerry Kessler, N4JL

At 01:55 PM 10/25/2009, Dave  Haney wrote:
>I have a Drake L-4B and L-4PS that I am selling for an old family friend
>whose son (a ham) became an SK and left his gear in her possession.
>
>The question is: on the block connector that runs from the power supply to
>the amp there is a short round cable that sticks out where the thick flat
>cable and block meet. It appears to be a fuse of some sort but part of it
>appears to be missing (the fuse and cap). Can anyone tell me if this is
>normal or is a piece missing ? If a piece is missing, how do I replace it ?
>
>Thanks in advance.
>
>73
>Dave Haney
>W3SJ
>
>
>______________________________________________________________
>Drake mailing list
>Home: http://mailman.qth.net/mailman/listinfo/drake
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Drake at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html