[Drake] Re: Drake TR4CW

[Richard Keller]

Dave,
Is this the same in the TR4C? In my TR4C at least, that R13
is a 33K in the grid to cathode of V3A mixer. Would that be
the one to which you refer?
73, Dick KF4NS
St. Petersburg, FL 33714 USA
Keep the glow!

----- Original Message ----- Message: 1
Date: Wed, 9 Nov 2005 06:47:27 EST
From: Wa1cvn at aol.com
Subject: Re: [Drake] TR4CW
To: amfone at sbcglobal.net, drake at mailman.qth.net
Message-ID: <258.905bfe.30a33bcf at aol.com>
Content-Type: text/plain; charset="US-ASCII"

There is a swamping resistor R-13 located near the relay
that has a tendency
to change value. It may be the cause of your problem.  This
resistor adjusts
the current reading to the meter and is factory selected.  I
have replaced a
couple of them for lower or erratic meter readings.

Hope this helps,
Dave