[Drake] Thanks for help: Frequency changes while...

[Rolf G. Schroeder]

Am Dienstag, 25. Februar 2003 20:01 schrieb Garey Barrell:

> I forgot to mention the MOST likely cause of your problem.....  I tend
> to forget that not everyone knows what some of us consider "common
> knowledge."
>
> When installing the main tuning knob, you have to press in on the knob
> before tightening the setscrew.  There is a piece of rubber tubing
Hi Garey and all the others,
it seems as if the hardened rubber piece is the problem, pressed the knob=
=20
after loosening the set screw and before fixing the set screw again.=20
Thanks for your help
Best Regards
Mit freundlichen Gr=FC=DFen
Rolf Schr=F6der

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety.=20
- Benjamin Franklin, 1759 -=20