[Drake] re source of drive belts for FPM-300

Fri, 4 Jan 2002 10:00:12 -0600

HI--re "toothed" belts- take the old belt to a local bearing or belt
wholesaler so that the pitch and length may be found.  You will then be
able to buy or order the correct belt.   Then post the part number and
mfr. to the H-C reflector for others to see !!!An "O" ring cannot be used
as the -exact- timing of the switches will not be right.

JACK IVERSON   K0EWU    111O N OLD MILL RD,  PALATINE  IL  60067-2772
      <[email protected]>              847-359-0941

On Fri, 04 Jan 2002 07:54:05 -0800 "CALVIN L. SHERMERHORN"
<[email protected]> writes:
> Hi Fern: What its worth!!! I was told that if I ever required drive 
> belts for
> the Heath SB series PA tune control, that i should go to my local 
> transmission
> repair facility. They have "ooddles" of "O" rings come drive belts. 
> Dunno if
> this a similar situation? 73 de Cal.
> 
> Fern Rivard wrote:
> 
> > I came across a gentleman who is looking for the source of drive 
> belts for
> > his FPM-300.  Best of 73's from Fern
> >
> > _______________________________________________
> > Drake mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/drake
> 
> _______________________________________________
> Drake mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/drake
> 