[Drake] MN2000 problem

[NI4L]

I took the cover off and saw a black spot on the backside of the
bandswitch reight below where the tank coil is soldered to it i put it
back together and tried it once more same freq and it did it again. When i
go to bypass works Perfect.
any one have a band switch for this tuner laying around or is there
another way to go about fixing it.. It is only that one spot.
chris NI4L

NI4L wrote:

> have the MN2000
> when i tune up ex. using 80 meter wire resonate at 3.920 tune down to
> 3.795
> after tuning swr1:1 ok then i run amp thru it and it hear sizzling
> sound.....
> does not do it with 100 watts  amp is a clipperton L about 1200 watts
> out.
> any suggestion. I haven't take the cover off the tuner yet just wanted
> to get an idea if anyone else had had this happen to them and what it
> was.
> chris
>
> --
>
> NI4L CUSTOM RESONANT DIPOLE
> LEGAL LIMIT ++ CUSTOM MADE CENTER FED DIPOLE
> Made with the same components used by our military forces today
> Custom made to YOUR FREQUENCY of operation
> Let me take the hassle out of making a RESONANT DIPOLE for you.
> Click here for more info...  <http://www.angelfire.com/nb/ni4l/>
>
> _______________________________________________
> Drake mailing list
> Drake@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/drake

--