[CW] Regarding the slowing down of bugs......

[Danny Douglas via CW]

A very good, simple and elegant solution to the problem of the 80 wpm 
dits, and 15 wpm dahs.
Thanks


> stan levandowski via CW <mailto:cw at mailman.qth.net>
> Friday, December 19, 2014 5:56 PM
> Here's my $4.00, 15 minute solution
>
> https://www.youtube.com/watch?v=8oZv9mVhBG4&feature=youtu.be
>
> 73 and Season's Greetings,
> Stan WB2LQF
>
>
> ______________________________________________________________
> CW mailing list
> Home: http://mailman.qth.net/mailman/listinfo/cw
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CW at mailman.qth.net
> CW List ARCHIVES: http://mailman.qth.net/pipermail/cw/
> Unsubcribe send email to cw-subscribe at mailman.qth.net
> Support this email list: http://www.qsl.net/donate.html
>
> =30=
> Roger Gates via CW <mailto:cw at mailman.qth.net>
> Friday, December 19, 2014 3:54 PM
> I'm surprised that no one mentioned the Vibroplex Vari-Speed 
> accessory. I installed one of these on my 1954 "standard" and can 
> change speed in a second or two. The only difference from Benny's mod 
> is that the Vari-speed vertical arm can rotate front to back for a 
> quick speed adjustment. Vibroplex has a nice video on their website 
> about this unit.
> Roger, W7KVT
>
>
> ------------------------------------------------------------------------
> <http://www.avast.com/> 	
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com <http://www.avast.com/>
>
>
> ______________________________________________________________
> CW mailing list
> Home: http://mailman.qth.net/mailman/listinfo/cw
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CW at mailman.qth.net
> CW List ARCHIVES: http://mailman.qth.net/pipermail/cw/
> Unsubcribe send email to cw-subscribe at mailman.qth.net
> Support this email list: http://www.qsl.net/donate.html
>
> =30=
> Benny Owens via CW <mailto:cw at mailman.qth.net>
> Friday, December 19, 2014 1:41 PM
> K4AOH
>
> IT DOES SLOW IT DOWN TO THE SPEEDS I LISTED.  IT WOULD SLOW DOWN MORE 
> IF EXTENDED BUT THAT DEFEATS MY GOAL OF NO FUMBLING WITH SCREWS, 
> ALLIGATOR CLIPS OR CLOTHES PINS ETC.  JUST DROP AND GO IN THE MIDDLE 
> OF A QSO ON THE FLY.  THIS METHOD WAS NOT INTENDED TO GET A BUG DOWN 
> TO 2 WPM.
>
> IF THIS BUG IS NOT SLOW ENOUGH I CANT WORK THE STATION.  IN FACT 
> ANYONE WANTING TO GO SLOWER COULD EASILY USE A HAND KEY.  I COULD NOT 
> REMEMBER THE FIRST WORD OF A SENTENANCE AT THE END AT SINGLE DIGIT WPM 
> WHICH IT DOES ANYWAY WITH TWO WEIGHTS STACKED ON THE ROD.
>
>
>
> ______________________________________________________________
> CW mailing list
> Home: http://mailman.qth.net/mailman/listinfo/cw
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CW at mailman.qth.net
> CW List ARCHIVES: http://mailman.qth.net/pipermail/cw/
> Unsubcribe send email to cw-subscribe at mailman.qth.net
> Support this email list: http://www.qsl.net/donate.html
>
> =30=
> K4OAH <mailto:k4oah at mindspring.com>
> Friday, December 19, 2014 1:32 PM
> Danny -
>
> You need to extend the rod to slow it down.  Stacking weights UP the 
> rod just damps the vibration.
>
> An alligator clip on the end out past the bumper with some solder 
> wrapped around it will allow you to slow it significantly.
>
> 73, Garey - K4OAH
> St. Charles, IL
>
>
>
>
> On Dec 19, 2014, at 12:09 PM, Danny Douglas via CW <cw at mailman.qth.net 
> <mailto:cw at mailman.qth.net>> wrote:
>
> Danny Douglas <mailto:n7dc at comcast.net>
> Friday, December 19, 2014 1:09 PM
> Hmmmm never thought to do that.  I just attempt to slow it down by 
> putting on more of the round weights, but of course it has never 
> worked well, with them being strung out along the round (not flat like 
> your picture) swinging rod.    Mine is SN 175333 issued to me as a 
> government (state) operator back in the late 60s (Broadway address), 
> and was probably the last one used with the last state dept cw 
> circuit, which I closed down around 1970.  Or so I was told, at the 
> time.   I still use it, as a secondary key on my backup hf rig 
> (IC706markII).  Dits are just too fast for most ops today.
> Thanks
> Danny Douglas
> n7dc at arrl.net
>
>

-- 
Danny Douglas


<http://www.getpostbox.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/cw/attachments/20141220/18f3e54c/attachment.html>