[CW] Vibroplex Original Damper Wheel

[D.J.J. Ring, Jr. via CW]

That's the procedure.  Thank you JP.

73

DR
 On Dec 13, 2014 11:54 PM, "Joseph L Pontek Sr via CW" <cw at mailman.qth.net>
wrote:

>  I am trying to remember, but it seems there were shoulder screws used
> for the damper wheels, but I don't remember the vintage. It was not
> permanent
> use for them.  I only saw a couple.  But, the screw should be screwed in
> until the damper is still loose. Holding the screw, put the nut on the
> back, snugly,
> but not so tight as to pull the screw through and strip threads.
>
>  On 12/13/2014 10:06 PM, stan levandowski via CW wrote:
>
> I'm a bit confused here -- If I tighten down on the screw/bolt, the damper
> wheel won't have any play.  If I don't tighten it, eventually it can
> loosen. This doesn't seem like a very good design and I'm afraid I'm
> missing something.  Perhaps the Original model isn't supposed to have a
> "loose" damper wheel??
>
>
> --
> Regards, Joe, Ronnie (Rowena), Marty & Sidney Pontek
> P.O. Box 280, Dangriga, Stann Creek District
> (Hopkins Village) Belize011-501-666-3564 Belize (cellular)
> or
> 5204 Texas Highway 49 W
> Omaha, TX 75571-6474
> U.S.A.903-434-9111 (My NEW cellular when in Texas)903-884-5990 (Skype telephone number, Belize & TX)
> Also, K8JP, member FOC-1743, CWops-876, QCWA-LM21894, OOTC-4607, A1OP, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21,
> Skype: v31joepalooka
> Facebook: Joe Pontek
> I am looking for Vibroplex Model X, Double lever and prefer basket cases to restore.
>
>
> ______________________________________________________________
> CW mailing list
> Home: http://mailman.qth.net/mailman/listinfo/cw
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CW at mailman.qth.net
> CW List ARCHIVES: http://mailman.qth.net/pipermail/cw/
> Unsubcribe send email to cw-subscribe at mailman.qth.net
> Support this email list: http://www.qsl.net/donate.html
>
> =30=
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/cw/attachments/20141213/8d88300a/attachment-0001.html>