[CVRC] Still FS

[Jack/W6NF]

>
> 1) KLM/TET two section, 11-foot tall rooftop tower. Designed for mount
> at the peak of a roof. Has plate for mounting Ham-M style rotor. $50.00.
>
> 1) HAM IV rotor with control box and about 125-feet of control cable.
> Only issue is that the bat-handle toggle switch has the handle broken
> off. I left it on and turned it off at an outlet strip with the rest
> of my gear so it was never a problem. $175.00.
>
> 3) Many pieces of aluminum tubing from 1/4 to 1-1/2-inch O.D. element
> material to 3-inch O.D. boom material. Too much to list here. Also
> have some aluminum panels, chassis and sheets of various sizes. You
> have to come, look and haggle :>)
>
> 4) 432 home-brew 21-element long yagi. Looks like stainless-steel
> elements and gamma match driven element. $15.00.
>
> 5) 6 and 2-meter rover antenna system. Two KB6KQ horizontal loops on
> 1-3/4-inch cammo support tube and mounted on a 2-inch trailer
> hitch...just plug it into your 2-inch receiver and guy it to pick-up
> bed tie-down points. Includes Dacron guy lines. Built, and used for
> many years, by K7XC. $100.00.
>
> 6) DX Engineering stainless-steel radial plate with SS hardware. $35.00.
>
> 7) Mag mount 2-meter 5/8-wave antenna. Useable on 6-mteres, too!
> $10.00
>
> 8) 7/8-inch Heliax hanger bracket. Handles 4 runs. $5.00
>
> 9) HyGain HDR-300A rotors and control boxes (2) Rotors work but
> readouts on both control boxes do not. Have complete documentation and
> some repair parts. $75.00 each.
>
> 10) Steel enclosure, 18x18x8 inches. Used to house my 6-way antenna
> switch. $15.00.
>
> 11) 7-conductor rotor cable, about 135 feet. $20.00.
>
> 12) 8-conductor rotor cable, about 125-feet. Used on my 6-way antenna switch.
> $20.00.
>
> 13) Home-brew full-size 3-element 15-meter yagi, built from Telrex
> Long-John parts. Heavy but works well. $25.00.
>
> 14) Home-brew full-size 2-element 20-meter yagi, built from Telrex
> Long-John parts. Parts also included to extend to 3-elements. $25.00.
>
> 15) An assortment of aluminum sheets, boxes and angle material. Open
> to offers on all.
>
> 16) A few chassis punches from 5/8 to 1-5/32-inch diameter. Greenlee,
> I believe. $8.00 to $15.00 depending on size.
>
> 17) An assortment of hand tools, both mechanic's and electronic.
> Priced reasonably.
     18) 28-volt 75-amp float charger, 220VAC input. This is a massive 
charger and would make in incredible 12-volt         DC power supply. $15.00

     19) 222 and 432 5-element rover yagis. Driven elements of both must 
be completed, $5.00 each.

     20) 125-foot length of Cable Xperts equivalent to LMR-400 with 
PL-259s, $40.00.

     21) 60-foot length of something that looks like LMR-400 but I 
cannot identify the manufacturer, with PL-259s.         Used on my 
6-meter long yagi and it worked fine, $20.00.

     22) Four 40-meter 1/4-wave verticals made from 1-3/4-inch aluminum 
cammo support tubing, with guy ring,         $25.00 each.

     23) One 20-meter 1/4-wave vertical, like the 40-meter versions, $15.00.

The second day of our moving sale will be held tomorrow, September 16th, 
starting at 8AM *sharp*. All items must be picked up at my home in 
Silver Springs.

Thanks,

Jack, W6NF