[CVRC] FS at our moving sale

[Jack/W6NF]

The following are available either before or at our moving sale:

> 1) Four element 15-meter OWA. Covers the whole band and works great.
> Includes sleeve balun. $60.00.
>
> 2) KLM/TET two section, 11-foot tall rooftop tower. Designed for mount
> at the peak of a roof. Has plate for mounting Ham-M style rotor. $50.00.
>
> 3) HAM IV rotor with control box and about 125-feet of control cable.
> Only issue is that the bat-handle toggle switch has the handle broken
> off. I left it on and turned it off at an outlet strip with the rest
> of my gear so it was never a problem. $175.00.
>
> 4) Many pieces of aluminum tubing from 1/4 to 1-1/2-inch O.D. element
> material to 3-inch O.D. boom material. Too much to list here. Also
> have some aluminum panels, chassis and sheets of various sizes. You
> have to come, look and haggle :>)
>
> 5) 432 home-brew 21-element long yagi. Looks like stainless-steel
> elements and gamma match driven element. $25.00.
>
> 6) 6 and 2-meter rover antenna system. Two KB6KQ horizontal loops on
> 1-3/4-inch cammo support tube and mounted on a 2-inch trailer
> hitch...just plug it into your 2-inch receiver and guy it to pick-up
> bed tie-down points. Includes Dacron guy lines. Built, and used for
> many years, by K7XC. $100.00.
>
> 7) DX Engineering stainless-steel radial plate. $35.00.
>
> 8) Plate transformer: 6kv C.T. at 500ma, minimum. 220VAC primary. $40.00.
>
> 9) Plate transformer: 3.1kv C.T. at 400ma. 220VAC primary. $20.00.
>
> 10) Mag mount 2-meter 5/8-wave antenna. Useable on 6-mteres, too!
> $10.00
>
> 11) 7/8-inch Heliax hanger bracket. Handles 4 runs. $5.00
>
> 12) HyGain HDR-300A rotors and control boxes (2) Rotors work but
> readouts on both control boxes do not. Have complete documentation and
> some repair parts. $100.00 each.
>
> 13) Steel enclosure, 18x18x8 inches. Used to house my 6-way antenna
> switch. $20.00.
>
> 14) 7-conductor rotor cable, about 135 feet. $20.00.
>
> 15) 8-conductor rotor cable, about 125-feet. Used on my 6-way antenna switch.
> $20.00.
>
> 16) Coax cables. Various lengths from 1 to 8 or 10 feet. A mixture of
> connectors with N, UHF, BNC and others. Open to offers on all.
>
> 17) A large assortment of coax adapters with N, BNC, UHF, SMA, F and
> perhaps even some TNC, SMB and SMC styles, too. Open to offers on all.
>
> 18) Home-brew full-size 3-element 15-meter yagi, built from Telrex
> Long-John parts. Heavy but works well. $25.00.
>
> 19) Home-brew full-size 2-element 20-meter yagi, built from Telrex
> Long-John parts. Parts also included to extend to 3-elements. $25.00.
>
> 20) An assortment of aluminum sheets, boxes and angle material. Open
> to offers on all.
>
> 21) A few chassis punches from 7/8 to 1-1/8-inch diameter. Greenlee,
> I believe. $10.00 to $15.00 depending on size.
>
> 22) An assortment of hand tools, both mechanic's and electronic.
> Priced reasonably.
>
> More items will likely be added as I find them. Our moving sale will
> be held September 15th and 16th starting at 8AM*sharp*  on both days.
>
> All items must be picked up at my home in Silver Springs.

Thanks,

Jack, W6NF