[Collins] 516F-2 choke replacement source
Robert Jefferis
jefferis at antelecom.net
Mon Aug 25 21:26:40 EDT 2008
Hello again,
I have received limited interest in a group purchase of the 516F-2 L1/L2,
complete assembly combination. I received an ETC quote today of $255 each,
for 2-4 units. I am now wondering if there might be greater interest in L1
alone. ETC will produce individual L1 pieces:
2-4 pieces = $160 each
10-24 pieces = $ 90 each
I have quotes from 2 additional manufacturers that built these "back in the
day" in accordance with the original Collins specifications (and they still
have the documentation in their archives), but their prices are in the
"Twilight Zone".
Thanks for reading.
Bob, KF6BC
-----Original Message-----
From: collins-bounces at mailman.qth.net
[mailto:collins-bounces at mailman.qth.net] On Behalf Of Robert Jefferis
Sent: Thursday, August 21, 2008 7:12 PM
To: collins at mailman.qth.net
Subject: [Collins] 516F-2 choke replacement source
Greetings,
The recent thread on sources for L1 and L2, and the discussion on voltage
breakdown ratings prompted me to nose around some more. New to me was the
fact that Freed Transformer became part of Electronic Transformer
Corporation (ETC), Paterson NJ, about 15 years ago. Well, ETC has all of the
original Freed designs and produces them to order. With respect to the
516F-2, they told me that the original Freed part number 37256, Collins P/N
668-0300-00 (NSN 5950-00-083-1622) is in their archive and is easily
produced again - just send money. Just for grins, I asked for a quote on 10
pieces. They came back with $180 per unit, 3-4 weeks ARO. Before you choke,
this is for the whole enchilada, the "dual reactor" assembly consisting of
L1 AND L2 preassembled with all new stack hardware, built and tested to
original specs, just like they used to sell it to Collins and the Federal
Government.
They did tell me that the breakdown voltage test requirement, or dielectric
breakdown strength test potential used was 60 Hz @ 3000 VRMS, yes, RMS. The
normal mode, or induced test potential was 400 VRMS, 200 Hz.
I did not inquire about smaller or larger quantities, or separate pieces,
i.e., just L1 or L2. I am just wondering if there might be interest in a
cooperative purchase? Cheers.
Bob, KF6BC
______________________________________________________________
Collins mailing list
Home: http://mailman.qth.net/mailman/listinfo/collins
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Collins at mailman.qth.net
More information about the Collins
mailing list