[Collins] S line power requirements Help???

[Garey Barrell]

Jerry -

That is an interesting point!!   The same manual that specifies 175 mA 
for the 800 VDC supply also says to load the transceiver to 210 mA plate 
current..... 

Just goes to show.

73, Garey - K4OAH
Atlanta

Dr.Gerald Johnson wrote:

>My handy 32S-3 manual says 230 ma at 800 volts (what you see on the plate 
>current meter) and 190 ma at 275 volts. Heater current is lower than for the 
>KWM-2,  6.3 volts at 6.0 amps or 12 volts at 3 amps or 24 volts at 1.5 amps.
>
>  
>