[Collins] More 75A-4 Recap

[Glen Zook]

Although there are 0.5 pf capacitors available, you
can take two 1.0 pf capacitors and put them in series.
 This will give you the equivalent of 0.5 pf. 
Remember that you can use any higher voltage rated
capacitors, just shouldn't use any lower voltage rated
capacitors.  Also, when you series capacitors you
increase the voltage rating of the entire package by
the sum of the voltages of the capacitors.

1.0 pf capacitors in voltages from 50 volts to at
least 500 volts are available from several sources
including Mouser ( http://www.mouser.com ).

Glen, K9STH


--- Thomas Beltran <tbeltran at earthlink.net> wrote:


Secondly, C-124 - this one is a bit confusing.  One
end goes to ground (It sits right next to the 50 mf,
150 v caps), the other end goes to pin 6 of V22 - the
book says it is a .5 mmf, or, I guess, .5 pf @ 200 V -
I could not find a capacitor of this rating.

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco


		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail