[Collins] 75A1 Trimmer Cap Question
Bruce J. Howes
[email protected]
Thu, 6 Feb 2003 13:32:38 -0500
I am sure that collective wisdom on the board has addressed this before, =
so
I appreciate your thoughts on this problem.
My 75A1 winter project seems to have a problem with at least 3 of the
ceramic trimmers.=20
During the alignment procedure, I can turn the screw fine, they were =
stuck,
but no difference is now on the meter.=20
In fact one of the trimmers seems "noisy" causing the S meter to jump =
around
until I press on the trimmer the screwdriver.
What kind of project is entailed in replacement?
Where can I get at least 3 of these trimmers from?
Anything else that should be done with in progress? I can see some mica =
caps
on the trimmer panels, should thee be changed as well?
As always, thanks in advance for you help and suggestions, they have =
served
well over the last few months to bring this old A1 back to life!
73 Bruce W1UJR
*************************************************************************=
***
**
Bruce James Howes
web: www.brucehowes.com
" When the only tool you own is a hammer,=20
every problem begins to resemble a nail." - Abraham Maslow
*************************************************************************=
***
**