[Central-Electronics] 20A diode bridge

[alancgut at gmail.com]

Mike,

After hitting send on my message, I had an afterthought. I'll never use all
those 1N34's that I have left here. If you want, send me your address via
email and I'll put 8 or 10 in a small 2"X3" plastic ziplock bag and sent
them along in a standard mailing envelope - no charge. They are very small
today and should travel just fine.

Alan, W9CG

-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
<central-electronics-bounces at mailman.qth.net> On Behalf Of Mike Wells via
Central-Electronics
Sent: Sunday, August 23, 2026 9:03 AM
To: Central Electronics Listserve <central-electronics at mailman.qth.net>
Subject: [Central-Electronics] 20A diode bridge

Good morning all,
I am new to the group and working on a newly acquired 20A with s/n  of 2441.
The 1N34A diodes in the plug in octal plug are bad. I replaced the plug with
one from another 20A to confirm that these are bad. Since true geranium
point contact diodes are hard to find is there a good substitute?
Thanks for your advice 


______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html