[Central-Electronics] Kenwood VFO for CE 10A or B

[George Maier]

Dan: 

As you already know, the Kenwood VFO's you mentioned cover the correct
frequency range for operation on 75/80 and 20M, but that's all as the other
bands require different frequencies to achieve the correct result when mixed
with a 9 MHz signal.    If you're happy with that, the real question is
whether it has enough drive available.  The 20A requires anywhere from 3 to
8V of RF at the VFO input, depending on what band you are on.  If the TS-520
or 820 VFO does that, you should be OK. 

73, George - W1LSB
 

-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
[mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of Dan Cox
Sent: Saturday, January 23, 2021 2:35 PM
To: Central-Electronics at mailman.qth.net
Subject: [Central-Electronics] Kenwood VFO for CE 10A or B

Subject: Kenwood VFO with CE 10A or 10B
Does anyone have any experience or information on using a Kenwood VFO-520 or
VFO 820 with the CE 10A or 10B?
They are quite stable. I have at least 20 years of Electric Radio but have
not found much info on CE gear in there yet.
Thanks for any feedback.
Dan K8WOZ
______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html