[Central-Electronics] WTB: 600L

[Jim Candela]

Jim,

  I am not familiar with how the 100V varies the power. In general though, with 
a SSB exciter, when you run at reduced power, the specifications of carrier 
suppression, and spurious  outputs all degrade. For example, with my old FT757, 
turning down the Mic gain so the PEP output was 10db down from maximum would 
make the suppressed carrier go from say -50db to -40 db down. Since CE was very 
innovative, maybe the "continuously variable" nature of the 100v bypasses this 
kind of issue.

  I wonder if anyone has done inter-modulation tests of the 600L? Looking at 
mine when running AM, and watching the trapezoid pattern, there is a 'bump' at 
the carrier level. Other linear amplifiers I have do not do this. The 8877 based 
linear amplifier has perfect walls of the trapezoid, and my 4 X 572B linear has 
a slight 'S' shaped curve to the trapezoid. The 600L has a unique signature. Not 
sure what that means though.

Jim
WD5JKO 


----- Original Message ----
From: Jim DiMauro <radio6146 at yahoo.com>
To: Jim Candela <jcandela at prodigy.net>; central-electronics at mailman.qth.net
Sent: Thu, March 31, 2011 6:07:24 AM
Subject: Re: [Central-Electronics] WTB: 600L

Hi Jim:

Thanx for your input.  The power output of the 100V is continuously variable
between full output and 10 Watts via a front panel control.  Since I plan to
dedicate the 600L to my 100V this should not be a problem.

73,
Jim
W2BVM



-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
[mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of Jim
Candela
Sent: Thursday, March 31, 2011 2:31 AM
To: Jim DiMauro; central-electronics at mailman.qth.net
Subject: Re: [Central-Electronics] WTB: 600L



Jim,

   Good luck for your search. I was lucky to find mine. Also plan ahead on
how 
you might match the 100V 100 watt output with an amplifier that might put
out 
full power with 5 watts drive. Got a 10db 100w attenuator?

73,
Jim
WD5JKO

----- Original Message ----
From: Jim DiMauro <radio6146 at yahoo.com>
To: central-electronics at mailman.qth.net
Sent: Wed, March 30, 2011 9:34:46 PM
Subject: [Central-Electronics] WTB: 600L

Hi All:



I'd like to find a 600L to pair up with my 100V.  A working unit is
preferred, but not absolutely necessary.  Does anyone have one that they'd
care to part with?



73,

Jim

W2BVM







______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html