[Central-Electronics] CE 20A - BC458 questions

[K3PID]

You are of course correct George! The Mic does NOT plug in but I wasn't sure
how to correctly phrase it so I went with plug and jack.

The question still begs for an answer, Is there a source for the Microphone
side of the RCA conector?


K3PID
Ron H.


----- Original Message ----- 
From: "George Maier" <George at MaierGroup.com>
To: "'K3PID'" <k3pid at sbcglobal.net>
Sent: Sunday, January 08, 2006 9:45 PM
Subject: RE: [Central-Electronics] CE 20A - BC458 questions


> Hi Ron:
> Here are three pix of a CE 458 VFO that I have, and two different front
> panels; one with the deluxe CE panel, and one without.
> If your mic plugs in, it can't be the standard connector.  The OEM was an
> RCA style screw-on mic connector.
> Good luck,
> George - K1GXT
>
> -----Original Message-----
> From: central-electronics-bounces at mailman.qth.net
> [mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of K3PID
> Sent: Sunday, January 08, 2006 7:58 PM
> To: central-electronics at mailman.qth.net
> Subject: [Central-Electronics] CE 20A - BC458 questions
>
> I hope this isn't too far off topic! I just completed rebuilding my 20A
and
> have started on the conversion of the BC-458 as a multiband VFO.
>
> 1. Does anyone have pictures of the modified BC-458?
>     a. Where did they place the new band switch?
>     b. What is the layout of the modified frequency dial?
>
> 2. Does anyone have (or have a source) for the microphone connector that
> plugs into the 20A? My Sure 440 is plugless!
>
>
> 73 & Tnx
> K3PID
> Ron H.
>
>
> _______________________________________________
> Central-Electronics mailing list
> Central-Electronics at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/central-electronics
>