[Central-Electronics] 200V ser # 1419

Mon, 8 Apr 2002 18:16:39 -0700 (PDT)

Would you consider sending it to me too?  Don't know if you've found my
web site useful or not!

Thanks,
Michael
--- George Maier <[email protected]> wrote:
> Hi Ken:
> I have a seven page CE factory document entitled "100V - 200V
> Alignment
> Instructions and General Service Information" that I'll scan for you.
> It was
> not part of the original manuals, and contains some good tips,
> including
> audio module maintenance. I figure I owe it to you, after all the
> good info
> I've downloaded from your site.
> Vy 73
> George Maier - K1GXT
> 
> "Kenneth D. Grimm, K4XL" wrote:
> 
> > I would like to add any information about the octal plugs with
> diodes to
> > the 100V and 200V folders on BAMA.  So, if anyone can provide that
> > information, I will make sure that it is available to anyone that
> wants
> > it in the future.  Also, while I'm begging for information, I have
> a
> > couple of pages in the 100V manual giving typical voltages.  The
> 200V
> > manual that I have on BAMA doesn't have similar pages.  I wonder if
> they
> > were left out of the one that I scanned, or if they simply were
> never
> > put in the 200V manual the way they were with the 100V.  As I'm
> about to
> > start trouble shooting a 200V, a voltage chart would be a BIG help!
> > Thanks and 73,
> > Ken K4XL
> > [email protected]
> > *** BoatAnchor Manual Archive ***
> > On the web at http://bama.sbc.edu or
> > FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
> >
> > ----- Original Message -----
> > From: "J C White" <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, April 08, 2002 5:51 PM
> > Subject: Re: [Central-Electronics] 200V ser # 1419
> >
> > > just found a notation in margin of my 200 V manual that some 100V
> came
> > > with octal plugs per a mod suggesteid my a ham. Many only the lst
> have
> > a
> > > copy of this mod from original puplicaation.  Serhaps soomeone
> would
> > be
> > > kind enough to share with us the diode polug in mod.  Best test
> is to
> > use
> > > the
> > > onboard scope with and without compressor and compare.  Also, the
> > > 200V is subject to arcing in final  10M broadband coil at SWR
> about
> > 3:1..the
> > > liquid rubber available for decorating car tire sidewalls will
> stop
> > this but
> > > obviously better to work into proper load!
> > >
> > > how bout itguys....anyone willing to scan and send us the diode
> mod or
> > post
> > > to
> > > a site where we can download?  I lost mine years ago...yes I
> > know...grey
> > > matter
> > > first part of body to turn to centent!
> > >
> > >
> > > _______________________________________________
> > > Central-Electronics mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/central-electronics
> >
> > _______________________________________________
> > Central-Electronics mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/central-electronics
> 
> _______________________________________________
> Central-Electronics mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/central-electronics

__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/