[Central-Electronics] 200V ser # 1419

Mon, 08 Apr 2002 21:12:56 -0400

Hi Ken:
I have a seven page CE factory document entitled "100V - 200V Alignment
Instructions and General Service Information" that I'll scan for you. It was
not part of the original manuals, and contains some good tips, including
audio module maintenance. I figure I owe it to you, after all the good info
I've downloaded from your site.
Vy 73
George Maier - K1GXT

"Kenneth D. Grimm, K4XL" wrote:

> I would like to add any information about the octal plugs with diodes to
> the 100V and 200V folders on BAMA.  So, if anyone can provide that
> information, I will make sure that it is available to anyone that wants
> it in the future.  Also, while I'm begging for information, I have a
> couple of pages in the 100V manual giving typical voltages.  The 200V
> manual that I have on BAMA doesn't have similar pages.  I wonder if they
> were left out of the one that I scanned, or if they simply were never
> put in the 200V manual the way they were with the 100V.  As I'm about to
> start trouble shooting a 200V, a voltage chart would be a BIG help!
> Thanks and 73,
> Ken K4XL
> [email protected]
> *** BoatAnchor Manual Archive ***
> On the web at http://bama.sbc.edu or
> FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
>
> ----- Original Message -----
> From: "J C White" <[email protected]>
> To: <[email protected]>
> Sent: Monday, April 08, 2002 5:51 PM
> Subject: Re: [Central-Electronics] 200V ser # 1419
>
> > just found a notation in margin of my 200 V manual that some 100V came
> > with octal plugs per a mod suggesteid my a ham. Many only the lst have
> a
> > copy of this mod from original puplicaation.  Serhaps soomeone would
> be
> > kind enough to share with us the diode polug in mod.  Best test is to
> use
> > the
> > onboard scope with and without compressor and compare.  Also, the
> > 200V is subject to arcing in final  10M broadband coil at SWR about
> 3:1..the
> > liquid rubber available for decorating car tire sidewalls will stop
> this but
> > obviously better to work into proper load!
> >
> > how bout itguys....anyone willing to scan and send us the diode mod or
> post
> > to
> > a site where we can download?  I lost mine years ago...yes I
> know...grey
> > matter
> > first part of body to turn to centent!
> >
> >
> > _______________________________________________
> > Central-Electronics mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/central-electronics
>
> _______________________________________________
> Central-Electronics mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/central-electronics