[CALV-ARES] RMS Relay version 3.0.0.0 Mandatory update for al sysops

Mon Nov 4 10:33:05 EST 2013

TO:  CALV ARES STATIONS

New RMS Relay version 3.0.0.0 update.  Please read message below.

73, Dennis

  _____  

From: phil at philsherrod.com <mailto:phil at philsherrod.com>  <phil at philsherrod.com <mailto:phil at philsherrod.com> >; 
To: <Winlink_Programs_Group at yahoogroups.com <mailto:Winlink_Programs_Group at yahoogroups.com> >; 
Subject: [Winlink_Programs_Group] RMS Relay 3.0.0.0 with Hybrid Network support released 
Sent: Mon, Nov 4, 2013 2:05:45 PM 

RMS Relay version 3.0.0.0 has been released.  You can get the update using the normal autoupdate procedure.  You can force an immediate update check by stopping and restarting RMS Relay.  If you have RMS Relay configured to ask for operator confirmation before installing updates, you may have to respond to a message box to get the update, so it&apos;s recommended that you force an update check while you&apos;re present.

This is a major advancement that provides support for both the traditional Winlink system that connects through the Internet to CMS, and it also supports radio-only message forwarding from RMS to RMS without using the Internet.  For more information about the Hybrid Network, please see: http://www.winlink.org/HybridNetwork

This version of RMS Relay requires the VOACAP program to be installed to compute propagation estimates.  Typically VOACAP is installed with RMS Express, but if you don&apos;t have it installed, you can download the installation program from: ftp://autoupdate.winlink.org/User%20Programs/itshfbc_120722.zip

It is recommended -- but not required -- that you install Trimode version 1.2.4.7, because it has some improvements for the hybrid network.  To get the update to that version, stop Trimode, add this line to the [Main] section of the RMS Trimode.ini file, and then restart Trimode:

Test autoupdate=true

If you are the sysop of an RMS that has Pactor capability, we strongly encourage you to install RMS Relay and join the hybrid network.  There is no disadvantage to doing this; it just allows your RMS to continue operation if the Internet connection is lost and to support message forwarding from other RMS.  Here is a link to the full installation program:

ftp://autoupdate.winlink.org/Sysop%20Programs/RMS_Relay_setup_3-0-0-0.zip

If your RMS is already part of the Hybrid Network, thank you.  It will take approximately 48 hours for non-hybrid RMS to be updated and their information incorporated in the propagation matrix.

Phil

W4PHS

__._,_.___

 <http://groups.yahoo.com/group/mdcec/post;_ylc=X3oDMTJvaGFhcWtnBF9TAzk3MzU5NzE0BGdycElkAzg2OTE0Njg0BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM1OARzZWMDZnRyBHNsawNycGx5BHN0aW1lAzEzODM1NzQ1NzE-?act=reply&messageNum=58> Reply via web post 

 <mailto:n7nms at yahoo.com?subject=Re%3A%20Fw%3A%20%5BWinlink_Programs_Group%5D%20RMS%20Relay%203%2E0%2E0%2E0%20with%20Hybrid%20Network%20support%20released> Reply to sender 

 <mailto:mdcec at yahoogroups.com?subject=Re%3A%20Fw%3A%20%5BWinlink_Programs_Group%5D%20RMS%20Relay%203%2E0%2E0%2E0%20with%20Hybrid%20Network%20support%20released> Reply to group 

 <http://groups.yahoo.com/group/mdcec/post;_ylc=X3oDMTJmYjZsdnMzBF9TAzk3MzU5NzE0BGdycElkAzg2OTE0Njg0BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEzODM1NzQ1NzE-> Start a New Topic 

 <http://groups.yahoo.com/group/mdcec/message/58;_ylc=X3oDMTMxcTRwamw0BF9TAzk3MzU5NzE0BGdycElkAzg2OTE0Njg0BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM1OARzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzEzODM1NzQ1NzEEdHBjSWQDNTg-> Messages in this topic (1) 

Recent Activity: 

 <http://groups.yahoo.com/group/mdcec;_ylc=X3oDMTJmNGpra3FvBF9TAzk3MzU5NzE0BGdycElkAzg2OTE0Njg0BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEzODM1NzQ1NzE-> Visit Your Group 

 <http://groups.yahoo.com/;_ylc=X3oDMTJlYmFpZ3VtBF9TAzk3NDc2NTkwBGdycElkAzg2OTE0Njg0BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTM4MzU3NDU3MQ--> 

Switch to:  <mailto:mdcec-traditional at yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional> Text-Only,  <mailto:mdcec-digest at yahoogroups.com?subject=Email%20Delivery:%20Digest> Daily Digest •  <mailto:mdcec-unsubscribe at yahoogroups.com?subject=Unsubscribe> Unsubscribe •  <http://info.yahoo.com/legal/us/yahoo/utos/terms/> Terms of Use •  <mailto:ygroupsnotifications at yahoogroups.com?subject=Feedback%20on%20the%20redesigned%20individual%20mail%20v1> Send us Feedback 

.

  <http://geo.yahoo.com/serv?s=97359714/grpId=86914684/grpspId=1705063108/msgId=58/stime=1383574571> 

__,_._,___

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/calv-ares/attachments/20131104/a0231acc/attachment.html>