[Boatanchors] Looking for a 500VDC @250 mils ,ils Power supply

[Bill Cromwell]

Hi Ray,

Unfortunately I am using my power supply as you have described. 
Fortunately I have some iron here I can check out that should be 
suitable for you to build the power supply. If you don't get an offer of 
the needed power supply let me know and I will verify the iron I have 
here. It has been in a box on the shelf for a long time and will have to 
make some effort to assure it is not damp inside. I will do all of that 
anyway whether or not you need the iron.

73,

Bill  KU8H

bark less - wag more

On 6/19/20 11:22 AM, Ray LaRue wrote:
> Looking for a choke input PS to power my vintage but excellent Elmac AF54H.
> 
> Needs to produce about 450 to 500 volts @ 250 mils under load, 
> preferrably with a 6.3 VAC @5 amps filament winding, for the transmitter.
> 
> No filament winding is necessary if there is room for me to install a 
> filament transformer on it.
> 
> OK if it needs new filter caps and rectifier tube.  What have you?
> 
> Thanks for your attention.
> Ray, W4BYG
>