[Boatanchors] Anyone familiar with the HO-13 Scan Adapter ?

[Jim Larsen]

Manual and schematic sent.


Jim Larsen AL7FS
1-907-223-3548










On Thu, Mar 21, 2019 at 5:47 PM Doug Hensley <w5jv at hotmail.com> wrote:

> Anyone familiar with the HO-13 Scan Adapter?  I have one that I have been
> studying lightly, trying to see if there are any clues to it's IF
> requirements.  Also, hoping to learn any maintenance tips.
>
> This one powered up, the trace came up nicely but a small swirl of smoke
> started coming from the back top so I shut it down immediately.  Fuse did
> not blow.  I see no signs of charring except two disk ceramic caps on the
> scope base look like they darkened around their edges.
>
> Manual anyone?
>
> Thanks in advance for any information,
>
> Doug W5JV
>
>
>
>
>
> Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.
> Looking for something special?  Ask us.
> Wanted: Petersen Type PR-1 in FT-243 holder cut for 1770 kHZ (Used in IF
> Stage of a Mackay Receiver).
>
>
>
>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Gary Harmon, K5JWK
> ** For Assistance: gharmon at idworld.net **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimlarsen2 at gmail.com
>