[Boatanchors] [Glowbugs] Hot - melt glue on plastic ?

[Peter Loron]

Here ya go:

https://www.amazon.com/E6000-230010-Craft-Adhesive-Ounces/dp/B007TSYNG8


-Pete

> On May 26, 2017, at 2:38 PM, Howie WA3MCK <wa3mck at gmail.com> wrote:
> 
> Gang,
> 
> What is this e6000 adhesive stuff everyone is talking about?
> Do I need some? Obviously I do... where can I purchase it?
> 
> Tnx es Happy Memorial Day
> 
> de Howie WA3MCK
> 
> 
> 
> 
> 
> 
> 
> On Friday, May 26, 2017, Gary MacGregor (KF5DZQ) <kf5dzq at gmail.com> wrote:
> 
>> Steve
>> What kind of cure time do you experience with e6000?
>> 
>> In our hot humid atmosphere her in Corpus Christi, Texas it tacks up in a
>> few minutes (depending on thickness), doesn't run. And is pretty much done
>> in 10-15 minutes. I don't remember what full cure time is. But so far I
>> haven't had to worry about that on projects.
>> I love the forever weather proof and release when needed properties. And
>> low to no vapors or residue.
>> 
>> It should be perfect for his battery project.
>> 
>> 73
>> Gary MacGregor KF5DZQ
>> 
>> Sent from my Stone & Chisel V 3.14
>> 
>> On May 26, 2017 11:42 AM, "Steve WB6TNL" <sigcom at juno.com
>> <javascript:_e(%7B%7D,'cvml','sigcom at juno.com');>> wrote:
>> 
>>> Hot melt, using an adhesive formulated for adhesion to plastic or plastic
>>> bonding, will work fine and cure almost immediately.
>>> 3M has lots if info on this online.
>>> 
>>> Finding a vendor for such adhesive may be the bigger problem whereas the
>>> liquid adhesives (E6000, Goop, etc.)
>>> are practically everywhere.  I like these for their adhesive properties
>>> but I don't like having to wait for them to cure.
>>> 
>>> 73.......Steve Smith WB6TNL
>>>                 "Snort Rosin"
>>> 
>>> On Thursday, May 25, 2017 at 1:22:53 PM UTC-7, kargocult wrote:
>>>> 
>>>> I have battery holder for the common 9 volt battery. I want to fasten to
>>>> the
>>>> 
>>>> backside of it, two small resistors for a voltage divider. My question
>>>> is, will
>>>> 
>>>> hot melt glue adhere to the plastic battery holder? If I rough it up a
>>>> little with
>>>> 
>>>> sandpaper ?  As well as holding down the resistors, I want to cover up
>>>> the
>>>> 
>>>> bare wire connections.
>>>> 
>>>> This is for a drop-in addition to old equipment, thus the odd-seeming
>>>> 
>>>> construction. The question is maybe not so dumb as it seems, as I have
>>>> found
>>>> 
>>>> in the past that so-called superglue fails to hold on to most plastics.
>>>> 
>>>> thanks-
>>>> 
>>>> Hue
>>>> 
>>> --
>>> --
>>> ZCZC
>>> This is a transmission from the Glowbugs list
>>> To unsubscribe from this group, send email to
>>> tetrode+unsubscribe at googlegroups.com
>>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>
>>> For more options, visit this group at
>>> http://groups.google.com/group/tetrode?hl=en
>>> NNNN
>>> 
>>> ---
>>> You received this message because you are subscribed to the Google Groups
>>> "Glowbugs" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to tetrode+unsubscribe at googlegroups.com
>>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>.
>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>> --
>> --
>> ZCZC
>> This is a transmission from the Glowbugs list
>> To unsubscribe from this group, send email to
>> tetrode+unsubscribe at googlegroups.com
>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>
>> For more options, visit this group at
>> http://groups.google.com/group/tetrode?hl=en
>> NNNN
>> 
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Glowbugs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to tetrode+unsubscribe at googlegroups.com
>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>