[Boatanchors] AT-1 manual info

[hwhall at compuserve.com]

Thanks, Mark! That's really what I needed to know. It seemed to me that there'd be little reason to complain about the meter banging around if people knew it could be turned off, so I was wondering if somehow that feature had been left out of the instructions.
 

 Wayne
WB4OGM

 

-----Original Message-----
From: Mark K3MSB <mark.k3msb at gmail.com>
To: Wayne Hall <hwhall at compuserve.com>
Cc: Boatanchors List <boatanchors at mailman.qth.net>; Heathkit List <heathkit at mailman.qth.net>
Sent: Tue, Sep 13, 2016 10:40 am
Subject: Re: [Boatanchors] AT-1 manual info



Wayne
I finished working on an AT-1 (Novice Rig) a few months ago.   
The center position is indeed OFF as the meter is undamped and bangs around if in the Ip or Ig positions.
Yes it’s in the manual (at least the one I have/had....).
73 Mark K3MSB
 


On Sep 13, 2016 12:35 AM,  <hwhall at compuserve.com> wrote:

I'm looking for someone who has a completer AT-1 manual to verify some information.  The AT-1 meter had an annoying habit of banging around when on CW but the schematic & parts list show the meter switch was 3-position, with the unmarked center stop turning the meter off while still letting the transmitter operate. My question is whether this feature was actually mentioned in the manual or if it was overlooked.

Thanks!

Wayne
WB4OGM
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html