[Boatanchors] Hammarlund bc-779a

[Richard Knoppow]

That makes more sense.  On mine the connecting cable is a laced cable 
with spade lugs on either end.  They should not be too difficult to 
make.  The problem is that an original will be as old as the one you 
have and maybe just as brittle.


On 1/25/2015 6:26 AM, Bob Bruno - K2KI wrote:
> John,
> I believe he is stating that he needs to connectors and/or full cable 
> harness with connectors intact for the connection from the power 
> supply to the radio itself.
> I'm going to have to find one someday soon myself as mine is brittle 
> and will not take another disconnect.
>
> On 1/24/2015 4:48 PM, John via Boatanchors wrote:
>> The manual I have shows a permanently connected cord set on the power
>> supply end.  It enters the chassis through a grommet.  On the other  
>> end is a
>> molded two prong AC plug. What power supply do you have?
>>   73,
>>      John,  W4AWM
>>     In a message dated 1/24/2015 3:53:41 P.M. Eastern Standard Time,
>> kf9wv at att.net writes:
>>
>> Need the  power cord which has the flat connectors on both ends. I 
>> can make
>> one but want  to stay as original as I can.Thanks George KF9WV...73
>> ______________________________________________________________
>>
>