[Boatanchors] Hammarlund bc-779a

[Richard Knoppow]

       Same here, I have the supply that works from 25 to 60 hz.  The 
power cord is permanently fixed to the PS chassis.


On 1/24/2015 1:48 PM, John via Boatanchors wrote:
> The manual I have shows a permanently connected cord set on the power
> supply end.  It enters the chassis through a grommet.  On the other  end is a
> molded two prong AC plug. What power supply do you have?
>   
> 73,
>   
>    John,  W4AWM
>   
>   
> In a message dated 1/24/2015 3:53:41 P.M. Eastern Standard Time,
> kf9wv at att.net writes:
>
> Need the  power cord which has the flat connectors on both ends. I can make
> one but want  to stay as original as I can.Thanks George  KF9WV...73
> ______________________________________________________________
> Boatanchors  mailing list
> Home:  http://mailman.qth.net/mailman/listinfo/boatanchors
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:Boatanchors at mailman.qth.net
> Message delivered to  w4awm at aol.com
>
> List Administrator: Duane Fischer, W8DBF
> ** For  Assistance: dfischer at usol.com **
>
>
> This list hosted by:  http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to 1oldlens1 at ix.netcom.com
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>