[Boatanchors] Please review & comment on my Heath Warrior HA-10 amplifier design changes

[Rick Poole WA1RKT]

Good evening, Gary.

I read that link per some suggestions I received earlier this evening, and also page 84 of the Heath SB-220 manual, and came up with some revisions to the schematic at http://www.rkt-tech.com/warrior labeled "UPDATE".

If you're so inclined, please take a look at that and let me know if you think I'm on the right track.

Thanks...

Rick WA1RKT


----- Original Message -----
From: "Gary Schafer" <garyschafer at largeriver.net>
To: "Rick Poole WA1RKT" <wa1rkt at comcast.net>, boatanchors at mailman.qth.net
Sent: Saturday, November 22, 2014 10:39:52 PM
Subject: RE: [Boatanchors] Please review & comment on my Heath Warrior HA-10 amplifier design changes

This link will get you started on the metering:
http://www.w8ji.com/metering_amplifier.htm 

basically the grid meter goes from filament center tap to ground. The plate
current meter goes from the top side of the grid meter to B-. you would lift
the B- from ground and it would now go to the meter shunt.

Good luck
Gary  K4FMX