[Boatanchors] WTB: 6.3VAC/20A and 10VAC/low current transformer

[Glen Zook via Boatanchors]

Use a voltage doubler circuit off of the 6.3 VAC line for the bias.  Such can be regulated down using a resistor and a zener. Glen, K9STH

Website: http://k9sth.net
      From: Rick Poole WA1RKT <wa1rkt at comcast.net>
 To: boatanchors at mailman.qth.net 
 Sent: Wednesday, November 19, 2014 11:50 AM
 Subject: [Boatanchors] WTB: 6.3VAC/20A and 10VAC/low current transformer
   
Need a filament and bias transformer for the Heath HA-10 Warrior amp.  Secondaries are 6.3 volts CT at 20 amps and 10 volts at some low current for the bias supply.  Separate transformers will also work, or I can just use 6.3VCT at 20A and wire in a wall wart for the bias supply.