[Boatanchors] WTB: 6.3VAC/20A and 10VAC/low current transformer

[hwhall at compuserve.com]

Several months ago the local surplus store had some brand-new fil transformers that might do but I'd have to see if any are still there. They were Stancor P-6309. 6.3 VCT, 20A, 2500 V test, 117/107 VAC primary. Internal electrostatic shield included. I can probably get one for about $65. (At the time, I saw they were about $120 at Allied & Mouser.) For estimating postage from 80917 to you, the transformer weight on their boxes said 6.7 lbs. 
 

 Wayne
WB4OGM

 

-----Original Message-----
From: Rick Poole WA1RKT <wa1rkt at comcast.net>
To: boatanchors <boatanchors at mailman.qth.net>
Sent: Wed, Nov 19, 2014 11:00 am
Subject: [Boatanchors] WTB: 6.3VAC/20A and 10VAC/low current transformer


Need a filament and bias transformer for the Heath HA-10 Warrior amp.  
Secondaries are 6.3 volts CT at 20 amps and 10 volts at some low current for the 
bias supply.  Separate transformers will also work, or I can just use 6.3VCT at 
20A and wire in a wall wart for the bias supply.

Please respond off-list to wa1rkt at comcast.net with price including shipping to 
NH 03053.

Thanks...

Rick WA1RKT
Londonderry, NH
Catch me on 14.300 MHz Intercon / MMSN most days
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net
Message delivered to hwhall at compuserve.com

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html