[Boatanchors] removing Hallicrafters SX28 from cabinet

[olaf at carolina.rr.com]

John---did you remove the two screws in the middle of the frontpanel,a little below the main and bandsspread dial---easily overlooked--73-Olaf,KF4TP.


---- John King via Boatanchors <boatanchors at mailman.qth.net> wrote: 
> I have removed all 8 screws holding the front panel of my SX28 and two small screws in the chassis at the rear of the receiver.
> 
> I have tried to pull the SX28 out of the cabinet, but the chassis only moves about i/8 inch. I have placed the rcvr face down and tried to lift the cabinet off the chassis to no avail. I have tried to remove the cabinet with the receiver on its' end and face down. I am missing something because I can't get the cabinet off the receiver.  Anyone have an SX28 and know how to remove the cabinet> Thanks and 73, John, K5PGW 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html