[Boatanchors] Desoldering Components

[Dave Harmon]

It's ok to remove solder from anything with that unit....I wouldn't try to
remove the old lead from the wafer lugs though.
They are pretty delicate.

Dave Harmon
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.


-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of David C. Hallam
Sent: Thursday, May 09, 2013 3:58 PM
To: james.liles at comcast.net
Cc: boatanchors at mailman.qth.net
Subject: Re: [Boatanchors] Desoldering Components

I am being convinced about buying a Hakko 808.  What about using it on
phenolic switch wafer lugs?

David
KW4DH


On 5/9/2013 4:54 PM, james.liles at comcast.net wrote:
> There is nothing that will compare with a Hakko 808.
>
> Kindest regards Jim K9AXN
>
>
> Message: 4
> Date: Thu, 09 May 2013 14:37:11 -0400
> From: "David C. Hallam" <dhallam at knology.net>
> To: Boatanchors-qth <boatanchors at mailman.qth.net>
> Subject: [Boatanchors] Desoldering Components
> Message-ID: <518BECD7.8030709 at knology.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I'm sure this has been discussed over and over, but I am at the point 
> where I am ready to start pulling out what little hair I have left on 
> my head.  I have a Hallicrafters SX-100 MK II that needs a number of 
> components replaced.  I have tested most of the resistors finding at 
> least 1/3 of them are out of spec, >10% and there are a multitude of 
> tiny chief capacitors.  I have now removed 5 of these and one tested bad.
>
> I have tried various method of removing the solder from tie points and 
> tube sockets; a Weller DS-500 desoldering station, a 40W soldering 
> iron with a 2.4mm chisel point and a solder sucker or desoldering 
> braid with and without liquid rosin flux, an assortment of dental 
> picks and Xacto knives to pull and separate leads.  I am at the point 
> where I am afraid of toasting the phenolic in the tie strips before I 
> have removed the solder sufficiently to get the components loose.
>
> How have others accomplished this?
>
> David
> KW4DH
>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

--
"I predict future happiness for Americans if they can prevent the government
from wasting the labors of the people under the pretense of taking care of
them."
Thomas Jefferson

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html