[Boatanchors] 300 0hm dummy load

[LeeCraner at aol.com]

Ohm-Mite also made a 300 ohm 100W dummy load (I used to have one).   But 
the 25 x 7500 ohm suggestion previously made is easy enough to construct  
between two pieces of copper clad.
 
73
Lee WB6SSW
 
 
In a message dated 12/20/2013 11:19:39 A.M. Pacific Standard Time,  
rbethman at comcast.net writes:

I'd say  it depends on how much work one wants to put into it.

Ohm-Mite made a  100W dummy load, air cooled, at 73 Ohm.

That could easily be fed with a  75 to 300 ohm balun.

Joe - write me.  I have such a  thing!

It is sitting around occupying space.

Bob -  N0DGN



On 12/19/2013 5:40 PM, manualman at juno.com wrote:
>  25, 7500 ohm resistors, 2 watt, in parallel.
>
> Pete,  wa2cwa
>
> On Thu, 19 Dec 2013 16:02:02 -0600 "Joe Walden"  <w5jdy at cox.net> writes:
>> I would like to build a 300 ohm  dummy load for about 50 watts..
>> Anyone have
>> any  advice..   Joe w5jdy in Norman,Ok..   Thanks for your  time...
>

______________________________________________________________
Boatanchors  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/boatanchors
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer,  W8DBF
** For Assistance: dfischer at usol.com **


This list  hosted by: http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html