[Boatanchors] Fuse holder question

[Dave Brown]

Or these- http://www.sicom.co.nz/fuse-clip-pc.-20mm-rt.-angle-xidp71016.html
ZL3FJ

----- Original Message ----- 
From: "Todd, KA1KAQ" <ka1kaq at gmail.com>
To: "Ken Kaplan" <krkaplan at cox.net>
Cc: "Boatanchors Mail List" <boatanchors at mailman.qth.net>
Sent: Monday, September 26, 2011 4:50 AM
Subject: Re: [Boatanchors] Fuse holder question


> On Sun, Sep 25, 2011 at 3:44 AM, Ken Kaplan <krkaplan at cox.net> wrote:
>> I need to replace some 3AG style fuses that have radial leads that
>> solder to a pc board. A while back, I found some goodies that were like
>> a little spring that fit onto the fuse end cap. One end of the spring
>> wire was long enough the insert in a pc board hole. Here's a picture
>>
>> http://www.qsl.net/k/kb7rgg//radio/images/fuseclips.jpg
> 
> There's also another option, if they're still available. Small 'S'
> clips that clip a new fuse to the end caps. No soldering required.
> Still have some in a parts bin from my Radio-TV shop back in the early
> 80s. Think I might've used them once.
> 
> ~ Todd,  KA1KAQ/4
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html