[Boatanchors] Kester 88

[Paul Kraemer]

I like Ersin multi core 63 37 the best of all wire solder
Today there are different flux cores too
Some not so great for general BA repair
Kester 44 is not what it used to be. The flux is organic and gives me a 
headache
Ersin is nice, but you pay for it. It can be found on ebay sometimes
Paul K0UYA
----- Original Message ----- 
From: "James Liles" <james.liles at comcast.net>
To: <boatanchors at mailman.qth.net>
Sent: Wednesday, September 14, 2011 7:44 PM
Subject: Re: [Boatanchors] Kester 88


> If you use Eutectic 63/37 or Tri–Eutectic --- Sn 95.6/ Ag 3.5/ Cu .9, the 
> connection will outlast you --- won’t age out or go brittle and fail.  The 
> Tri however has a bit higher melting point.
>
> Kindest regards Jim K9AXN
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html